Trap Hi-Hat Rolls
The hi-hats are where a trap beat moves. Below are seven hat patterns over the same trap kick and clap, from plain 8ths to 1/32, triplet and 1/64 rolls, so you can hear what each one adds. Play them, edit them and download the MIDI.
Pick an example above the grid, press play, click squares to edit, and download your version as MIDI. The sounds are a free drum kit (CC0 samples); in your DAW it plays your own kit.
How a hi-hat roll is written
The grid is in 16th notes. A roll squeezes several hits into one 16th step. In the grid it is the pink square:
| Roll | Hits in one 16th | Note value |
|---|---|---|
| ×2 | 2 | 1/32 notes |
| ×3 | 3 | 1/32-note triplets |
| ×4 | 4 | 1/64 notes |
All examples use the kick and clap of the trap main pattern at 140 BPM, so only the hats change.
The examples, from simple to busy
- 8ths: the plain base most trap hats start from.
- 16ths: every 16th, with the in-between notes played as quiet ghost notes so the 8ths still lead.
- 1/32 roll into the clap: a two-step roll on the 16ths just before beat 3, pushing into the clap.
- Triplet roll at the end: the whole last beat of bar 2 as ×3 rolls, a stutter that leads into the next bar.
- Roll ramp: ×2, ×3 and ×4 on the last three 16ths of each bar, so the roll speeds up.
- Busy hats: the version from the Drum Pattern MIDI Pack, 16ths with a ×3 and ×4 roll at the end.
Tips for trap hats
- Change the rolls, keep the rest: keep kick and clap steady and move the rolls every two or four bars. Most of the movement in a trap beat comes from the hats.
- Roll into something: rolls work best right before the clap or before beat 1 of the next bar.
- Not too many: one or two rolls per two bars usually sounds more deliberate than rolls everywhere.
- Pitch and velocity: many producers lower the velocity inside a roll, or pitch the hats up or down through it, so the roll moves instead of buzzing.
The Drum Patterns Cheat Sheet + Chord MIDI Pack
The main pattern for all 18 genres as printable step grids with tempo and swing (PDF), plus 72 chord progressions from hit songs in all 12 keys (864 MIDI files) to put on top of the beat.
Your downloads are ready. The MIDI pack link is on its way to your inbox too.
DRUM CHEAT SHEET PDF → CHORD MIDI PACKWant full grooves with chords, bass and drums already written? See the Song Starter MIDI Kit ($19) →
Every pattern, ready to arrange
All 18 genres (Trap included), 9–10 versions each: main loops, 4-bar phrases with fills, an 8-bar section, intro, stripped, breakdown, drop and busy-hat versions. 178 MIDI files with tempo and swing, royalty-free.
Quick answers
How do you make hi-hat rolls in trap?
Start from 8th-note hats, then replace a 16th step just before the clap or before the next bar with a roll of 2, 3 or 4 hits (1/32 notes, 1/32-note triplets or 1/64 notes). Change where the rolls fall every two or four bars.
What tempo are trap hi-hats?
Trap is usually 130–150 BPM, felt in half time. The examples on this page are at 140 BPM; change the tempo slider before downloading the MIDI.
What is the difference between 1/32 and triplet rolls?
A 1/32 roll puts two hits in one 16th step. A triplet roll puts three hits in the same space, which sounds faster and more like a stutter.
Can I download these hi-hat patterns as MIDI?
Yes. Pick an example above the grid and press the MIDI button: two bars with kick, clap and hats in the General MIDI drum map. Free to use in your own beats.