Home / Mixing Guides / Sidechain Compression Settings: Ratio, Attack and Release
Free cheat sheet

Sidechain Compression Settings: Ratio, Attack and Release

Ratio, attack, release and gain reduction for the five common sidechain jobs, and a calculator that turns your BPM into release times.

The Sonic Secrets · Updated November 2026
QUICK ANSWER

Sidechain settings by use

Starting points. Set the compressor's sidechain input to the kick (or vocal), then adjust threshold until you see the gain reduction listed.

UseRatioAttackReleaseGain reductionResult
Bass / 808 ducking under the kick4:1–8:10–5 ms50–150 ms2–6 dBKeeps kick and bass from fighting; barely audible
House / EDM pump (pads, chords)4:1–∞ (or volume shaper)0–1 msabout a 1/8–1/4 note6–12 dBThe audible "breathing" pump
Trap 808 under the kick4:1–∞0–2 ms40–100 ms3–8 dBShort dip so the kick transient cuts through
Vocal ducking (beat under the vocal)2:1–3:110–30 ms150–300 ms1–3 dBMusic bus keyed from the vocal, subtle
Reverb / delay ducking3:1–4:15–10 ms150–400 ms3–6 dBEffect returns keyed from the dry vocal: clear words, big tails

Release time from your tempo

The release should let the sound recover before the next kick. Enter your BPM:

INTERACTIVE VERSION

Settings for every element on one map

MixMap gives frequency, pan, width, level, compression, reverb and delay starting points for 63 elements across Pop, Hip-Hop, R&B, Electronic and Indie. Click an element to get its settings.

The rules that matter most

1. Fast attack, timed release

The attack should grab the sound as the kick hits (0–5 ms); the release decides the groove. Too long and the sound never comes back, too short and it clicks or distorts.

2. Subtle for balance, deep for effect

2–6 dB under the kick fixes low-end conflict without being heard. The house pump uses 6–12 dB and a release close to the beat.

3. Use a ghost kick for a steady pump

Trigger the sidechain from a muted kick on every beat so the pump keeps going through breakdowns and fills.

4. Volume shapers are sidechain too

Tools that draw a volume curve per beat give the same pump with exact timing and no threshold to set.

Quick answers

What are good sidechain compression settings?

For bass under the kick: ratio 4:1–8:1, attack 0–5 ms, release 50–150 ms, 2–6 dB of gain reduction. For an audible house pump: ratio 4:1 or higher, attack 0–1 ms, release about a 1/8 to 1/4 note, 6–12 dB.

How do I set sidechain release to the tempo?

Divide 60,000 by the BPM to get a quarter note in milliseconds. At 124 BPM a quarter note is 484 ms and an eighth is 242 ms; a release in that range lets the sound recover before the next kick.

Should I sidechain the 808 to the kick?

Often yes, with a short, fast dip of 3–8 dB and 40–100 ms release, so the kick transient comes through. If the 808 plays the kick's role, you can skip the kick or keep it very short instead.

What attack should a sidechain compressor have?

As fast as possible, 0–5 ms, so the gain drops the moment the kick hits.

Related

GUIDEHow to Mix Kick and BassGUIDECompression SettingsTOOLDelay & Reverb CalculatorGUIDE808 EQ Cheat Sheet